Server has arrived!
Moderator: Forum Moderators
- BaronVonRotterdam
- UT2004 Server Admin
- Posts: 2603
- Joined: Thu Feb 16, 2006 9:42 pm
- Location: The Terrible State (New York)
- Contact:
Server has arrived!
Hey Everyone,
The server made its way safely to Michigan today. We're hoping tomorrow (12/19) they'll take down the old server and plug the new one in. Once that happens we just have to configure a few things and we should be able to bring up the servers. Once I get the most current Patch 180 source code from joeyz I'll be able to finish up Patch 180. Hang tight everyone, we're close!
The server made its way safely to Michigan today. We're hoping tomorrow (12/19) they'll take down the old server and plug the new one in. Once that happens we just have to configure a few things and we should be able to bring up the servers. Once I get the most current Patch 180 source code from joeyz I'll be able to finish up Patch 180. Hang tight everyone, we're close!
| ASRock Fatal1ty X470 | AMD Ryzen 3700x @Stock | 32GB DDR4 3200 mHz | Zotac GeForce RTX 2060 Super | Dell S2417DG |
Re: Server has arrived!
Yahoo!
- BaronVonRotterdam
- UT2004 Server Admin
- Posts: 2603
- Joined: Thu Feb 16, 2006 9:42 pm
- Location: The Terrible State (New York)
- Contact:
Re: Server has arrived!
Server arrived on Friday, it needs a VGA adapter though and the techs won't have that installed until Monday. So we're hoping Monday, or Tuesday the servers will be back up.
| ASRock Fatal1ty X470 | AMD Ryzen 3700x @Stock | 32GB DDR4 3200 mHz | Zotac GeForce RTX 2060 Super | Dell S2417DG |
- Archangel
- Master Sergeant
- Posts: 783
- Joined: Sat Jul 07, 2007 11:04 pm
- Location: Asskicker in Heaven
- Contact:
Re: Server has arrived!
OMG.....always something.....BaronVonRotterdam wrote:Server arrived on Friday, it needs a VGA adapter though and the techs won't have that installed until Monday. So we're hoping Monday, or Tuesday the servers will be back up.
Re: Server has arrived!
guessing the box doesn't have a serial port on it, either that or they do it old school with kvm's.... serial port with board support for reboots etc is usually the way they go *saves a lot of leg work* .. hum... guess it's kvm's .... oh well.. santa says ok I guess nyuk
- BaronVonRotterdam
- UT2004 Server Admin
- Posts: 2603
- Joined: Thu Feb 16, 2006 9:42 pm
- Location: The Terrible State (New York)
- Contact:
Re: Server has arrived!
Alright so from my understanding the IP to the server has changed. Joey and I plan on going on tonight and configuring the server so we can bring back up the UT servers. If all goes well everything should be back up and running by Christmas!
| ASRock Fatal1ty X470 | AMD Ryzen 3700x @Stock | 32GB DDR4 3200 mHz | Zotac GeForce RTX 2060 Super | Dell S2417DG |
- BaronVonRotterdam
- UT2004 Server Admin
- Posts: 2603
- Joined: Thu Feb 16, 2006 9:42 pm
- Location: The Terrible State (New York)
- Contact:
Re: Server has arrived!
I just got off the phone with joey and we agree that we shouldn't have to change IPs and he is going to call them in the morning and see why they want to change it and see if we can keep the old one. If he can't then we're going to go ahead with configuring to the new IP in the morning.
| ASRock Fatal1ty X470 | AMD Ryzen 3700x @Stock | 32GB DDR4 3200 mHz | Zotac GeForce RTX 2060 Super | Dell S2417DG |